RadioCom 5 RX / TX

DSP-Filter Analyzer, Decoder- and Transmit-Software

DSP-Filter decoding with a Computer.
RTTY-, CW-, PSK-, Fax-, Satfax-, Synop-, SSTV- Decoder 
Radio-Control for more than 80 Receivers and Transceivers
AudioRecoder, 3D Scanner, Equalizer, SatTracking, AudioAnalyser
Scopes and Frequency-Analyser Time-Frequency-Management

Minimum requirements:
Intel Pentium / Celeron with 200 MHz or better.
ColorGraphic min.16 Bit Colors
Screen Resolution: 1024x 768
16 bit bi-directional Soundcard with Line In
Win 95/98/ME/XP/2000 and NT 4.0 SP/3

What does this Program do?

It decodes digital and analog signals from the Radio. It also improves the quality of sound, what was in the past only able with a expensive DSP-Receiver. The signal goes direct into your computer over the soundcard for processing, you can then also control your radio over the COM-port and all this without any extra hardware. The received signals are filtered and given out to the computer loudspeakers. RadioCom 5 will be delivered with: Filter-Analyzer, Time Spectroscopes, Dual Scope, Audio-Recorder, RTTY, CW, FAX, SSTV, PSK (PSK31, Q- and B-PSK), Synop-Decoder, 3D Scanner and Sattracking. This means you all what you need in one program !

Up to now the requirement of SSB-receiver an decoders for receiving radio messages was extremely high and expensive. With todays normal multimedia-PC a complete new concept could be developed so that the expensive extra filters are replaced. and the operating comfort is highly raised. Expensive screens, scopes and tools are realised on your computer screen.

It's hard work to understand and program for Digital-Sound-Processing, Frequency-Analysing and Decoding. What was so far with expensive filter technology possible is now realised on the computer. Completely hissed signals from low cost receivers are so improved that the effect of the integrated equalizer, is very convincing to hear and to see on your display.

With RadioCom 5 we have created a desktop specially fit to your necessity. The Live-WorkViewer for example facilitates you to receive a weatherfax, while you are modifying an other one. without interrupting the incoming fax. All desktop elements can be modified to your own belong. The Dual-Scope improves the analyse from cause and effect of the signal quality. SpectrumAnalyser, TimeSpectroScope and X/Y_Scope are helpful for that.

With the modifiable database of the Frequency-Manager it is possible to save all the complex adjustments of radio stations, and to recall them by demand. The database also holds decoder-data for the SynopDecoder and Kepplerdatas (for sat-receiving). Now you can plan with the Time-Manager different tasks so nothing is missed.

The Frq-/Channel-Scanner-Function shows you signal strength, Audio-events and 3D Diagrams. The event-saving makes later analysing of events with frequency and time possible. And with the Audio-Recorder you can record and replay signals for later analysing or decoding.

SatFax can receive live and synchronous without the normal Doppler effects and display with highest resolution. The included Sattrack-Program allows you to see when and where you can find the satellites on the world map.

The AudioController controls all audio functions, drivers and mixers, also the special AudioSquelch and the DSP-filter with the FFT-Equalizer (Fast-Fourier-Transformation). This allows to set several Notch filters in one bandfilter or to realise a filter curve with desired waviness and variable slope with a 2-Hz resolution. You can simply draw a curve character with the mouse.

No Demo available, but Screenshots look here.

Technical Data RadioCom 5 RX/TX

Controls all Audio functions, drivers and mixers. Audio-Squelch, Filter- and Equalizer- Functions controls, etc.

 RTTY, SITOR, B-PSK, Q-PSK, (PSK31), incl. NAVTEX and SYNOP-Decodierung. All parameters totally variable.

AM / FM Fax, all IOC's and RPM's; Fax-Special-Filter, HAM-Fax, Weather-Fax and SAT-Fax direct.

All Modi. Special filters, Colour up to 32 Bit, all picture formats and parameter totally variable.

All parameter totally variable.

Record and replay from signals, incl. Functions for later analysing and decoding.

Filter / Equalizer
Filter-/ equalizer functions up to 2 Hz resolution with variable slope. All filter combinations possible.

Channel-Scanner, Frequency-Scanner
3D-displays from signal strength, audio-events or time diagrams. event-saving for later analysing.

Organize reception from text and picture from the desired time

 Displays all Satellites on a word map, inclusive all Kepplerdatas and decoder types, also with a time schedule.

(c) 2000 BONITO Germany

Web:      email: